Suzuki DR-Z125L - Page 133

5-26 CHASSIS
• Remove the clutch lever holder
1 and engine stop button 2.
• Remove the throttle grip case
3 and grip.
• Remove the handlebars
4.
• Remove the steering stem upper bracket
5 by removing the
steering stem head nut.
• Remove the steering stem nut
6 by using the special tool.
" 09940-14930: Steering stem nut socket wrench
• Remove the steering stem lower bracket.
NOTE:
Hold the steering stem bracket by hand to prevent it from falling.
• Remove the dust seal
7.
• Remove the steering stem upper bearing
8.