Suzuki DR-Z125L - Page 184

7-26 SERVICING INFORMATION
CONROD + CRANKSHAFT
Unit: mm (in)
OIL PUMP
CLUTCH
Unit: mm (in)
ITEM STANDARD LIMIT
Conrod small end I.D. 14.004 – 14.012
(0.5513 – 0.5517)
14.040
(0.5528)
Conrod deflection
—
3.0
(0.12)
Conrod big end side clearance 0.10 – 0.45
(0.004 – 0.018)
1.0
(0.04)
Conrod big end width 15.95 – 16.00
(0.628 – 0.630)
—
Crank web to web width 53.0 ± 0.1
(2.09 ± 0.004)
—
Crankshaft runout
—
0.08
(0.003)
ITEM STANDARD LIMIT
Oil pressure (at 60°C, 140°F) Above 15 kPa (0.15 kgf/cm
2
, 2.1 psi)
Below 35 kPa (0.35 kgf/cm
2
, 4.9 psi)
at 3 000 r/min.
—
ITEM STANDARD LIMIT
Clutch lever play 10 – 15
(0.4 – 0.6)
—
Drive plate thickness 2.90 – 3.10
(0.114 – 0.122)
2.60
(0.102)
Drive plate claw width 11.8 – 12.0
(0.46 – 0.47)
11.5
(0.45)
Driven plate distortion
—
0.10
(0.004)
Clutch spring free length 32.6
(1.28)
31.0
(1.22)