8-10 DR-Z125/LK4 (’04-MODEL) AND DR-Z125/LK5 (’05-MODEL)
SUSPENSION Unit: mm (in)
TIRE PRESSURE
FUEL + OIL
ITEM STANDARD/SPECIFICATION LIMIT
Front fork stroke 180 (7.1) —
Front fork spring free length — 587 (23.1)
Front fork oil level 173.0 (6.81) —
Front fork oil type SUZUKI FORK OIL SS-08 (#10)
or an equivalent fork oli
Front fork oil capacity (each leg) 172 ml (4.3/4.5 US/lmp oz) —
Rear shock absorber spring
pre-set length
DR-Z125 240.5 (9.47) —
DR-Z125L 241.1 (9.49) —
Rear wheel travel DR-Z125 160 (6.3) —
DR-Z125L 170 (6.7) —
Swingarm pivot shaft runout — 0.6 (0.02)
COLD INFLATION
TIRE PRESSURE
kPa kgf/cm
2
psi
FRONT 100 1.0 14
REAR 105 1.0 14
ITEM SPECIFICATION NOTE
Fuel type Use only unleaded gasoline of at least 87 pump
octane (R/2 + M/2) or 91 octane or higher rated by
the research method.
Gasoline containing MTBE (Methyl Tertiary Bu tyl
Ether), less than 10% ethanol, or less than 5%
methanol with appropriate cosolvents and corro-
sion inhibitor is permissible.
Fuel tank capacity including
reserve
6.6 L (1.7/1.5 US/lmp qt)
reserve 1.7 L (0.4/0.4 US/lmp qt)
Engine oil type SAE 10W-40, API SF or SG
Engine oil capacity Change 850 ml (0.9/0.7 US/lmp qt)
Filter
change
950 ml (1.0/0.8 US/lmp qt)
Overhaul 1 100 ml (1.2/1.0 US/lmp qt)
To Next Page
Loading...
