3-4 ENGINE
• Remove the gearshift cam lever.
• Loosen the rear axle nut
1 and chain adjuster nuts
2 (left
and right). Make sure that the drive chain has enough slack.
• Remove the engine sprocket
3.
NOTE:
When loosening the engine sprocket bolt, depress the brake
pedal.
• Remove the clutch release arm
4 along with the clutch cable.
• Disconnect the crankcase breather hose
5.
• Disconnect the generator lead wire coupler
6 and pick-up
coil lead wire coupler
7.
To Next Page
Loading...
