Suzuki DR-Z125L - Page 80

3-44 ENGINE
CRANKSHAFT BEARING INSTALLATION
• Install the crankshaft bearings with the special tool.
& 09913-70210: Bearing installer set
DRIVESHAFT BEARING INSTALLATION
• Install the driveshaft bearings using the special tool.
& 09913-70210: Bearing installer set
• Install the washer
1.
• Apply a small quantity of SUZUKI SUPER GREASE “A” to the
lip of the oil seal.
) 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the oil seal using the special tool.
& 09913-70210: Bearing installer set
• Install the bearing retainer
2.
NOTE:
Apply a small quantity of THREAD LOCK “1342” to the bearing
retainer screws.
+ 99000-32050: THREAD LOCK “1342”
COUNTERSHAFT BEARING INSTALLATION
• Install the countershaft bearings with the special tools.
& 09913-70210: Bearing installer set