2-12 PERIODIC MAINTENANCE
Replace the oil filter cap and tighten the nut securely.
Add new engine oil and check the oil level as described in the
engine oil replacement procedure.
Engine oil capacity
Oil change: 1.7 L (1.8 US qt, 1.5 Imp qt)
Oil and filter change: 1.8 L (1.9 US qt, 1.6 Imp qt)
Engine overhaul: 1.9 L (2.0 US qt, 1.7 Imp qt)
When reassembling the oil filter, make sure that the oil
filter is installed as shown above. If the filter is installed
improperly, serious engine damage may result.
ENGINE OIL HOSES
Inspect initially at 1 000 km (600 miles, 1 month) and
every 6 000 km (4 000 miles, 6 months) thereafter.
Inspect the engine oil hoses for damage and oil leakage. If any
damages are found, replace the engine oil hoses with new ones.
OIL FILTER REPLACEMENT
Drain the engine oil as described in the engine oil replace-
ment procedure.
Remove the oil filter cap 1 and oil filter 2.
Replace the oil filter with a new one.
NOTE:
Before replacing the oil filter cap, make sure that the spring
3
and a new O-ring
4
are installed correctly.
Make sure that the O-ring 5 behind the filter is in the correct
position.
2
5
To Next Page
Loading...
General
