46
Test ride the motorcycle checking all mechanical func-
tions.
Tighten all nuts, bolts, and miscellaneous mounting
parts to the proper torque specs.
Confirm that all cables and wiring harnesses are con-
nected and routed correctly.
CLUTCH COVER
Check the tightening torque of clutch cover bolt.
Clutch cover bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
FUEL
NOTE:
• Use only unleaded gasoline of at least 87 pump
octane (R/2+M/2 method).
• Oxygenated fuel can be used, if the ethanol
(grain alcohol) contain is not greater than 10%.
To Next Page
Loading...
