ENGINE
3-28
Remove the generator stator
Remove the trigger coil
.
.
Hold the generator rotor with the special tool, remove the
starting clutch bolt.
Remove the roller , push piece , and spring from the
starting clutch.
Remove the starter clutch gear.
Remove the generator rotor and key with the special tool.
11F14-003: M16 screw
11F14-001: Rotor holder
11F14 005: Generator rotor remover M30-
11F14-001: Rotor holder
Do not damage the key slot and crankshaft when
removing the key.
Do not remove the starting clutch unless necessary.
4
5
1
2
3
To Next Page
Loading...
