Suzuki GSX-R1000 2007 - Page 329

7-16 COOLING AND LUBRICATION SYSTEM
• Install the water pump.
NOTE:
Set the water pump shaft end ' to the oil pump shaft ( as
shown.
• Tighten the water pump mounting bolts to the specified
torque.
" Water pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Pass the gear position switch lead wire  under the water pump
lib.
• Connect the water hoses. (10-20)
• Install the engine sprocket cover.
• Install the gearshift lever. (10-34)
• Pour engine coolant. (2-18)
• Pour engine oil. (2-12)
• Install the under cowlings. (8-5)
8 N·m
(0.8 kgf-m,
6.0 lb-ft)