Sveaverken F100 - Page 95

87 ©2022 Sveaverken. All rights reserved.
Sveaverken F100 Auto Steer System Software User Manual
Terrain Compensation:
Tap Terrain Compensation in the application list, and turn on the switch to
enable this feature.
Smart Approaching:
Enable the Smart Approaching function ，that the vehicle can travel to the
guidance line even when the vehicle's heading is at 90° to the direction of the guidance line.
Single Straight Line Mode:
Enable the Single Straight Line Mode, the straight line will be moved
under the vehicle immediately when autopilot is clicked.
Keep Pre-translation Guidance Lines:
Enable this function, the guidance line after translating will
be used as a new guidance line, and the original guidance line will be retained; Disable this
function, the original guidance line will be directly replaced after translating.
6.3.5 Correction Source
Tap
Correction Source
on the
DEVICE SETTINGS
screen to configure the correction source. Refer
to section 2.5 "Connecting to a Signal Source" for details.
6.3.6 Diagnostics Center
Tap
Diagnostics Center
on the
DEVICE SETTINGS
screen to view the device information. Refer to
section 6.1.2 "Diagnostics Center" for details.
6.3.7 Vehicle Library
Tap
Vehicle Library
on the
DEVICE SETTINGS
screen to configure vehicle parameters. Refer to
section 2.6 "Setting Vehicle Parameters" for details.