38 A-96.250.341 / 061015
AMI Powercon
Instrument Setup
Measuring unit Menu 5.1.1.2
Set the <Measuring unit> according to your requirements:
S/cm
S/m
External
devices
Program all parameters for external devices (interface, recorders,
etc.) See program list and explanations 5.2 Signal Outputs, p. 75
and 4.2 Relay Contacts, p. 73.
Limits Alarms Program all parameters for instrument operation (limits, alarms).
See program list and explanations 4.2 Relay Contacts, p. 73.
Temp.
Compensation
Menu 5.1.3
Choose between:
none
Coefficient
Neutral salts
High-purity water
Strong acids
Strong bases
Ammonia, Ethanolamine
Morpholine
Quality
Assurance
Menu 5.1.4
Set the Level according to your requirements, details see Quality
Assurance of the Instrument, p. 52.
To Next Page
Loading...