Swann AMI Powercon - Menu 4: Operation

68 A-96.250.341 / 061015
AMI Powercon
Program Overview
8.5. Installation (Main Menu 5)
Sensors Flow None *Menu numbers
5.1* 5.1.1* Q-Flow
Sensor parameters Cell Constant 5.1.2.1*
5.1.2* Temp. Corr. 5.1.2.2*
Cable length 5.1.2.3*
Meas. unit 5.1.2.4
Temp.Compensation Comp. none
5.1.3* 5.1.3.1* Coefficient
Neutral salts
High-purity water
Strong acids
Strong bass
Ammonia, Etham
Morpholine
Quality Assurance Level 0: Off
5.1.4* 5.1.4.1* 1: Trend
2: Standard
3: Crucial
Signal Outputs Signal Output 1/2 Parameter 5.2.1.1/5.2.2.1*
5.2* 5.2.1/5.2.2* Current Loop 5.2.1.2/5.2.2.2*
Function 5.2.1.3/5.2.2.3*
Scaling Range Low 5.2.x.40.10/11*
5.2.x.40 Range High 5.2.x.40.20/21*
Relay Contacts Alarm Relay Alarm Conductivity Alarm High 5.3.1.1.1.1*
5.3* 5.3.1* 5.3.1.1* Alarm Low 5.3.1.1.1.25*
Hysteresis * 5.3.1.1.1.35
Delay 5.3.1.1.1.45*
Sample Flow Flow Alarm 5.3.1.2.1*
5.3.1.2* Alarm High 5.3.1.2.2
Alarm Low 5.3.1.2.35
Sample Temp. Alarm High 5.3.1.3.1*
5.3.1.3* Alarm Low 5.3.1.3.25*
Case Temp.high 5.3.1.4*
Case Temp.low 5.3.1.5*