Electrical systems
65
Fault Possible Cause Proposed Fix
Control Panel
Problems
Control Panel has no display
Check batteries and fuses, turn PSU isolate switch and
charger switch on and ensure mains supply is connected.
Check control panel connecting lead at PSU and behind
Control Panel
Contact your Dealer
12v Power turns off
Battery protect feature has operated to protect the Vehicle
battery and or the Leisure battery.
Engine has been started, all equipment has been
disconnected to meet EMC requirements.
Control Panel locked / erratic function
Observe control panel handling instructions
Control panel software may have crashed. Reboot control
panel by turning off the PSU isolate switch. Wait 30
seconds then turn the switch back on.
To Next Page
Loading...
