Synology RT1900ac User Manual

24
Chapter 7: Update and Restore Your Synology Router
Reset Synology Router
If you forgot the administrator/Wi-Fi password or the Synology Router becomes unreachable, you can x the
situations by pressing the RESET button on the bottom shell.
1
Use a pencil or ball pen to press and hold the RESET button.
2
Press and hold the RESET button for four or ten seconds:
•
For four seconds (Soft Reset)
: The system will reset passwords of the
admin
and the administrator with
equal privileges but other users' credentials will remain unchanged. The system will also reset the following
settings (rewall , DHCP services, Wi-Fi, Parental Control, and Trafc Control) and start the SRM Setup
Wizard.
Note:
During Soft Reset, the LED indicators behave as below:
1. The STATUS LED turns
static
orange, and the other LEDs become inactive for up to 30 seconds until the reset
is complete.
2. The STATUS LED turns green (Soft Reset is complete), and the other LEDs become active and behave as
stated in the "LED Indicator Table".
•
For ten seconds (Hard Reset)
: The system will be reset to the factory default. The data stored in the
external storages will remain intact.
Note:
During Hard Reset, the LED indicators behave as below:
1. The STATUS LED turns
blinking
orange, and the other LEDs become inactive for up to four minutes until the
reset is complete.
2. The STATUS LED turns green (Hard Reset is complete), and the other LEDs become active and behave as
stated in the "LED Indicator Table".
Register Synology Account
Synology Account is a service-integrated platform that allows you to register and manage the personal account.
With your personal Synology Account, you can enjoy various services from Synology, and subscribe to Synology
eNews to know about important software updates and promotional events in your local area.
To register/access your Synology Account, please go to
SRM
>
Synology Account
, or go to
Synology's ofcial
website
.

Synology RT1900ac Specifications

General

VPN support	PPTP, OpenVPN, L2TP/IPSec
Ethernet LAN	No
Port forwarding	Yes
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
VPN tunnels quantity	5
High power	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
Compatible memory cards	SDHC, SDXC
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Antennas quantity	3
Antenna gain level (max)	4.6 dBi
USB version	3.2 Gen 1 (3.1 Gen 1)
Frequency band	2.4 & 5 GHz
Frequency range	2.4 - 5 GHz
WLAN data transfer rates supported	600, 1300 Mbit/s
Product color	Black
Internal memory	256 MB
Processor cores	2
Processor frequency	1000 MHz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	SNMP, SSH, WEP, WPA, WPA2
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	10.82 W
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	206 mm
Width	66 mm
Height	160 mm
Weight	510 g