Synology RT1900ac User Manual

28
Chapter 10: Manage External Devices and Privileges
Install & Manage USB/SD Storage
With a USB/SD storage, your Synology Router can turn into a storage device for personal data and multimedia
les.
To install external USB/SD storage to your Synology Router, please attach the storage to the corresponding slot.
At
Storage & Printer
>
Storage
, you can nd out the total available external storage (e.g. USB drives & SD
cards) on your Synology Router. There you can also format and manage the storage to suit your needs.
Note:
1. Please refer to the
compatibility list
for approved USB/SD storage.
2. Some system services and packages may create temporary les on USB/SD storage devices. To safely eject the
USB/SD storage for system stability and prevent accidental data loss, press the Eject button on your Synology
Router or eject the storage at
Storage & Printer
>
Storage
.
Dene User/Folder Privileges
After external storage is established on your Synology Router, you can create shared folders for public use (e.g.
“
public
”) and home folders for individual users.
To create shared folders, please go to
Storage & Printer
>
Privileges
>
Shared Folder
. There you can also set
users’ access privileges to the folder.
To create users, please go to
Storage & Printer
>
Privileges
>
User
. There you can also set the user’s access
privilege to shared folders.
Install & Manage Network Printers
Your Synology Router can become a printer server, allowing you to print out documents such as photos
and articles over the network. You can also set up Google Cloud Print to print out needed documents from
everywhere.
To install a network printer, please attach it to the USB slot.
To manage a network printer connected to your Synology Router, please go to
Storage & Printer
>
Printer
.
Note:
Please refer to the
compatibility list
for approved network printers.
Install & Manage 3G/4G Dongles
With a 3G/4G dongle, your Synology Router can still provide Internet access to client devices via a 3G/4G
network. The dongle can transform your Synology Router into a Wi-Fi hotspot.
To install a 3G/4G dongle to your Synology Router, please attach it to the USB slot. The installed dongle will be
right available. If not, please check/modify the settings.
To manage the dongle settings, please go to
Network Center
>
Internet
>
3G & 4G
.
Note:
Please refer to the
compatibility list
for approved 3G/4G dongles.
Manage External Devices and Privileges
10
Chapter

Synology RT1900ac Specifications

General

VPN support	PPTP, OpenVPN, L2TP/IPSec
Ethernet LAN	No
Port forwarding	Yes
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
VPN tunnels quantity	5
High power	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
Compatible memory cards	SDHC, SDXC
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Antennas quantity	3
Antenna gain level (max)	4.6 dBi
USB version	3.2 Gen 1 (3.1 Gen 1)
Frequency band	2.4 & 5 GHz
Frequency range	2.4 - 5 GHz
WLAN data transfer rates supported	600, 1300 Mbit/s
Product color	Black
Internal memory	256 MB
Processor cores	2
Processor frequency	1000 MHz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	SNMP, SSH, WEP, WPA, WPA2
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	10.82 W
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	206 mm
Width	66 mm
Height	160 mm
Weight	510 g