1
getting started
11
Synrad Firestar ti-Series operator’s manual
Use information in this chapter to prepare your Firestar ti-Series laser for operation.
The order of information presented in this chapter is the same as the order of tasks that
you will need to perform. The best way to get your laser ready for operation is to start at
Unpacking and work your way through Connecting.
This chapter contains the following information:
■Introduction – introduces Firestar ti-Series lasers, lists important features, and de-
scribes Firestar nomenclature.
■Unpacking – provides important information about shipping your ti-Series laser.
■Inventory – displays and describes all components shipped with your laser.
■Mounting – describes how to attach the ti-Series laser to a mounting surface.
■Connecting – explains how to connect power and control cables to the laser.
To Next Page
Loading...
