operation
24 Synrad Firestar ti-Series operator’s manual
Controls and indicators
OEM ti60 side panel
(SA models)
Figure 2-3 OEM ti60 side panel controls and indicators
1
DB-9 connector – provides an auxiliary +5 V power source as well as +48 VDC for powering 48 V
cooling fans. The +5 VDC output is protected by a 0.5 A self-resetting fuse while both +48 VDC
outputs are sourced directly from the user’s 48 V DC power supply and protected by internal 1.1 A
self-resetting fuses. Refer to DB-9 connections in the Technical Reference chapter for pinouts and
signal descriptions.
(Air-Cooled ti60 OEM Shown)
1
To Next Page
Loading...
Need help?
General
