Index
CS-5100 LAS Instructions for Use
Revised October 2014
i
Index
A
Analysis ..............................................................3-1
Sample on the CS-5100 (while analyzing a
sample on the tracks) ......................................3-2
Sample on the sampler (while analyzing a
sample on the tracks) ......................................3-2
Sample on tracks ............................................3-1
STAT sample (while analyzing a sample on
the tracks) .......................................................3-3
Analysis results display (only of the track
sample) ...........................................................4-1
B
Basic operations .................................................2-1
C
Causes of errors and corrective actions .............9-1
Checking analysis results ...................................4-1
Checking the LAS connection status ..................2-1
Conditions of use ...............................................1-2
Creating a calibration curve
Before analyzing a sample on the tracks ........8-1
While analyzing a sample on the tracks ..........8-1
Customizing screen displays ..............................7-1
D
Design and function ...........................................1-3
[Detail] dialog box ...............................................9-3
Disconnecting the LAS .......................................2-2
F
[Filter / Sort / View] dialog box ...........................7-1
H
Hazards ..............................................................1-2
J
[Joblist] screen ...................................................4-1
O
[Order Inquiry] screen ........................................6-2
Q
QC analysis ........................................................ 5-1
Control set on the CS-5100 (before analyzing
a sample on the tracks) ................................... 5-1
Control set on the CS-5100 (while analyzing
a sample on the tracks) ................................... 5-2
Tracks .............................................................. 5-3
While analyzing a sample on the tracks
(setting the control into the sample rack) ........ 5-2
While analyzing a sample on the tracks
(setting the control on the reagent table) ........ 5-2
S
[Sample Volume Check] screen ......................... 6-1
Shutdown ........................................................... 2-2
Specifications ..................................................... 1-4
System settings .................................................. 6-1
T
Troubleshooting .................................................. 9-1
Turning ON the power ........................................ 2-1
To Next Page
Loading...
