SystemAir DANVENT DV10


27

i.2.10Removetransportbrackets–whenspringmountsareinstalled
i.2.10.1Impellerdiameters220–560mm
Ifthefansareinstalledonspringmountsthetransportbracketsmustberemovedaftertheinstallationof
theairhandlingunit.Twotransportbracketsarefittedtothecoilspringsduringtransportand
installation.
Bothtransportbracketsmustallberemovedtogivethefullanti‐vibrationfunctiontothecoilsprings.The
transportbracketsaremademorevisiblewithyellowlabels.Afterremovalofthetransportbracketsthey
mustbedisposedofsafely.



Afterdisposalofthetransportbracketstheyellow
labelontheoutsideofthefaninspectiondoorhasno
functionandshouldberemoved.

