SystemAir DANVENT DV10


28

i.2.10.2Impellerdiameters630–1.000mm
Ifthefansareinstalledonspringmountsthetransportbracketsmustberemovedaftertheinstallationof
theairhandlingunit.Fourtransportbracketsarefittedtothecoilspringsduringtransportandinstallation.
Thefourtransportbracketsmustallberemovedto
givethefullanti‐vibrationfunctiontothecoilsprings.
Thetransportbracketsaremademorevisiblewithyellowlabels,asshowninthepicturebelow.After
removalofthetransportbracketstheymustbedisposedofsafely.




Afterdisposalofthetransportbracketstheyellowlabelon
theoutsideofthefaninspectiondoorhasno
functionandshouldberemoved.
