Instructions for unloading on the site as well as installation and connection |
13
This type of bracket at the bottom of Geniox units in the
sizes 20 to 31 is reinforced for lifting the unit. Mount a
shackel in each of the 4 brackets that should be suitable
for lifting the weight of the section. The weight of the
section is printed on the label placed on the inspection
side of the unit.
Caution
Do not lift the section in the 4 brackets at the top of the section, because those brackets are not mounted
on profiles that are bearing. The connection between these profiles at the top of the section is not designed
to lift the bottom of the section with the heavy components. There is a potential risk that the bottom with
the heavy components may fall down with serious risk of injury and damage to property.
Bracket at the bottom for lifting and assembling Geniox
units in the sizes 20 — 31
output |
To Next Page
Loading...
Need help?
General
