To Next Page

To Previous Page

| Instructions for unloading on the site as well as installation and connection

Example of very heavy duty furniture trolleys. Turned

with the wheels upwards and placed on the forks of hand

manual forklifts these heavy duty furniture trolleys are

very suitable for safe and careful rolling of the unit sec-

tions over to the base frames.

Pull sections together with a strap. We recommend the

shown type of strap because this type is not damaging

the frame profiles in the bottom of the units. An example

of strap is shown to the right. Note! Do not place the

strap on the vertical profiles because the plastic corners

and the profiles are not at all reinforced for the heavy

load and stress that is created by the tensioner when a

section is pulled along the base frame. To avoid any load

and stress on the plastic corners the strap must be care-

fully placed on the bottom profiles of the unit when sec-

tions are pulled together.

Note! Never — place the strap on the vertical profile too close to a corner, because the plastics corners and the pro-

files are not at all reinforced for the heavy load and stress created by the tensioner when a section is pulled along

the base frame or on the floor.

output |

SystemAir Geniox Series User Manual

Questions and Answers: