ARES-G2 Getting Started Guide Page 19
The ARES-G2 Messages Touch Screen
The Messages tab (shown in the figure below) displays status messages that can be used for troubleshoot-
ing.
Figure 6 ARES-G2 Messages touch screen.
The ARES-G2 Settings Touch Screen
The Settings tab is used to identify your ARES-G2 instrument, its location, and network (IP) address infor-
mation. In addition you can perform the normal force tare function, adjust FCO camera focus and light,
and calibrate the touch screen.
Figure 7 ARES-G2 Settings touch screen.
To Next Page
Loading...
Need help?
General
