I/NET Conversions Access Control File Conversion Utility
I/NET 2000 Getting Started 3-5
Refer to TCON241, I/NET 2000 Utilities Operator Guide, for full
instructions on the functions available in this utility.
Access Control File Conversion Utility
This utility will convert your access control files to the new format.
Figure 3-4 shows the dialog for this utility.
1. Select the file types you wish to convert by activating the
checkbox(es). For an initial upgrade installation, you should
activate all three options.
2. Select the
Version for the Source File. This is your current
version of I/NET, not the version you are upgrading to.
Figure 3-4. Access Control File Conversion Utility
To Next Page
Loading...