Starting the Configure Program I/NET Configuration
4-2 I/NET 2000 Getting Started
You may create multiple I/O Server configuration profiles. This
feature is useful if you work with several different I/NET environ-
ments, because you can change system parameters simply by
selecting a different profile.
Note: Prior to configuring I/NET, review the Readme file for up-to-date
information.
Starting the Configure Program
Note: Certain modifications to your existing profile, or the selection of an
alternate profile, require the I/O Server to shut down and be re-
started before they can take effect. Where this is the case, a dialog box
will warn you to shut down the I/O Server.
The Setup program starts the Configure program for you automat-
ically.
To manually start the Configure program, select
Start >
Programs > INET 2000 > INET Configuration.
Alternatively, if
I/NET is running, you can right-click on the I/O Server icon and
select
Configure from the context menu.
The I/NET Configuration Profiles screen, shown in Figure 4-2,
displays. The Active Configuration field, at the top of the box,
displays the name of the configuration profile that I/NET is
currently using. The list box contains all of the defined I/NET
configurations.
You can select another configuration profile to use, add a new
configuration profile, or modify an existing profile. You can also
access the NetPlus Router Configuration editor and the Host Masks
Editor.
Figure 4-1. I/O Server System Tray Icons
To Next Page
Loading...