I/NET Configuration NetPlus Router Configuration
I/NET 2000 Getting Started 4-27
The configuration file will be saved to your Save directory. (The
default is SAV. ) The filename will be in the form of
Machine.npr, where Machine represents the machine name of
the NetPlus Router.
Restoring Configurations
If the NetPlus Router configuration file becomes corrupted or was
edited off-line, you can restore the saved configuration file (.NPR)
from your hard drive to the NetPlus Router. The .NPR file restores
the configuration settings and message routing masks.
Note: You must have previously saved the configuration file, as described
above.
1. Select the desired NetPlus Router from the NetPlus Router
Summary dialog box and click
Restore.
2. You will be prompted for a password, if one has been
assigned. Enter the password and click
OK.
The configuration parameters are sent to the selected NetPlus
Router immediately.
To Next Page
Loading...