Taco SKV SelfSensing

Taco® SKV
58 302-365, Effective: June 5, 2017
© 2017 Taco, Inc.
13.0.9 Main Menu Structure - page 7
21-32 Ext. 2 Maximum Reference 21-64 Ext. 3 Dif. Gain Limit 22-43 Wake-up Speed [Hz] 22-90 Flow at Rated Speed 23-64 Timed Period Stop 21-33 Ext. 2 Reference Source
22-** Appl. Functions 22-44 Wake-up Ref./FB Dif-
ference
23-** Time-based Functions 23-65 Minimum Bin Value
21-34 Ext. 2 Feedback Source 22-0* Miscellaneous 22-45 Setpoint Boost
23-0* Timed Actions 23-66 Reset Continuous Bin Data
21-35 Ext. 2 Setpoint 22-00 External Interlock
Delay
22-46 Maximum Boost Time 23-00 ON Time 23-67 Reset Timed Bin Data
21-37 Ext. 2 Reference [Unit] 22-01 Power Filter Time
22-5* End of Curve 23-01 ON Action 23-8* Payback Counter
21-38 Ext. 2 Feedback [Unit]
22-2* No-Flow Detection 22-50 End of Curve Function 23-02 OFF Time 23-80 Power Reference Factor
21-39 Ext. 2 Output [%] 22-20 Low Power Auto Set-
up
22-51 End of Curve Delay 23-03 OFF Action 23-81 Energy Cost
21-4* Ext. CL 2 PID 22-21 Low Power Detection 22-6* Broken Belt Detection 23-04 Occurrence 23-82 Investment
21-40 Ext. 2 Normal/Inverse Con- trol
22-22 Low Speed Detection 22-60 Broken Belt Function 23-08 Timed Actions Mode 23-83 Energy Savings
21-41 Ext. 2 Proportional Gain 22-23 No-Flow Function 22-61 Broken Belt Torque 23-09 Timed Actions Reactivation 23-84 Cost Savings 21-42 Ext. 2 Integral Time 22-24 No-Flow Delay 22-62 Broken Belt Delay
23-1* Maintenance 24-** Appl. Functions 2
21-43 Ext. 2 Differentation Time 22-26 Dry Pump Function
22-7* Short Cycle Protec- tion
23-10 Maintenance Item 24-0* Fire Mode
21-44 Ext. 2 Dif. Gain Limit 22-27 Dry Pump Delay 22-75 Short Cycle Protection 23-11 Maintenance Action 24-00 Fire Mode Function
21-5* Ext. CL 3 Ref./Fb. 22-3* No-Flow Power Tun-
ing
22-76 Interval between Starts 23-12 Maintenance Time Base 24-01 Fire Mode Configuration
21-50 Ext. 3 Ref./Feedback Unit 22-30 No-Flow Power 22-77 Minimum Run Time 23-13 Maintenance Time Interval 24-02 Fire Mode Unit 21-51 Ext. 3 Minimum Reference 22-31 Power Correction Fac-
tor
22-78 Minimum Run Time Override
23-14 Maintenance Date and
Time
24-03 Fire Mode Min Reference
21-52 Ext. 3 Maximum Reference 22-32 Low Speed [RPM] 22-79 Minimum Run Time
Override Value
23-15 Reset Maintenance Word 24-04 Fire Mode Max Reference
21-53 Ext. 3 Reference Source 22-33 Low Speed [Hz]
22-8* Flow Compensation 23-16 Maintenance Text 24-05 Fire Mode Preset Refer-
ence
21-54 Ext. 3 Feedback Source 22-34 Low Speed Power [kW] 22-80 Flow Compensation
23-5* Energy Log 24-06 Fire Mode Reference
Source
21-55 Ext. 3 Setpoint 22-35 Low Speed Power [HP] 22-81 Square-linear Curve
Approximation
23-50 Energy Log Resolution 24-07 Fire Mode Feedback
Source
21-57 Ext. 3 Reference [Unit] 22-36 High Speed [RPM] 22-82 Work Point Calculation 23-51 Period Start 24-09 Fire Mode Alarm Handling 21-58 Ext. 3 Feedback [Unit] 22-37 High Speed [Hz] 22-83 Speed at No-Flow
[RPM]
23-53 Energy Log
24-1* Drive Bypass
21-59 Ext. 3 Output [%] 22-38 High Speed Power
[kW]
22-84 Speed at No-Flow [Hz] 23-54 Reset Energy Log 24-10 Drive Bypass Function
21-6* Ext. CL 3 PID 22-39 High Speed Power
[HP]
22-85 Speed at Design Point [RPM]
23-6* Trending 24-11 Drive Bypass Delay Time
24-9* Multi-Motor Funct. 25-25 OBW Time 25-59 Run-on Line Delay 26-2* Analog Input X42/3 26-53 Terminal X42/9 Bus Con-
trol