Taie FY800 - Level 1 (User Level) All Parameters Display

FY operation manual 28
10.4 Level 1 (User Level) All Parameters Display
Level 1
PV / SV
OUTL
AT
Auto tuning
Output percentage
Press SET key
AL3  Alarm3 set value
SOAK  Alarm3 soak time
RATE  Slave SV rate
RAMP  SV ramp operation
AL3/SOAK
RATE/RAMP
AL1  Alarm1 set value
SOAK  Alarm1 soak time
HBAC HBA current setting value
AL1/SOAK/HBAC
AL2  Alarm2 set value
SOAK  Alarm2 soak time
HBAC HBA current setting value
PV / SV
AL2/SOAK/HBAC
※ : If no key is pressed within 60 seconds, it will automatically return to LEVEL 1 (user level) and display PV/SV