B1.4 T855 General Information M8SL2-00-002-812
© Copyright Tait Electronics Limited August 2004. All rights reserved.
Figure 1.2 T855 Front Panel Controls
Gate LED
The Gate LED indicates the sta-
tus of the mute circuit. The LED
is lit when a signal above the
mute threshold is received.
Gating Sensitivity
Sets the RF signal level required
to open the mute gate and allow
audio to pass to the output.
Supply LED
The Supply LED is lit when DC
power is supplied to the receiver.
Line Level
Sets the audio output line level.
Monitor Volume
Adjusts the speaker volume if
a speaker is connected.
Monitor
This switch opens the mute,
allowing continuous monitoring
of the audio signal:
On audio unmuted
Off audio muted.
To Next Page
Loading...
Need help?
General
