F1.2 General Information M8SL2-00-002-812
© Copyright Tait Electronics Limited August 2004. All rights reserved.
1.2 Specifications
1.2.1 Introduction
The performance figures given are minimum figures, unless otherwise indicated, for
equipment operating at standard room temperature (+22°C to +28°C).
Details of test methods and the conditions which apply for Type Approval testing in all
countries can be obtained from Tait Electronics Ltd.
1.2.2 General
Basic Power Supply Concept … switched mode technology pulse
width modulation
Overtemperature Protection … shuts down when PC Board tempera-
ture rises above 95°C ±5°C
Reset: auto recovery
Cooling … convection and forced air (fan)
Efficiency … 80%, full load
Temperature Range:
230V
AC
supply …–10 to +60°C
115V
AC
supply …–10 to +50°C
Isolation:
Input to Output … 3000V
AC
, 1 minute
Input to Ground/Chassis … 1500V
AC
, 1 minute
Output to Ground/Chassis … 500V
AC
, 1 minute
1.2.3 AC Mains Input
Volt age: … 100 to 130V
AC
47–63Hz
200 to 240V
AC
47–63Hz
AC Input Current … 2.8A maximum
(115V
AC
at full load)
Maximum Inrush Current … 40A maximum
(230V
AC
at full load)
Connection to mains supply … IEC plug on rear panel
To Next Page
Loading...
Need help?
General
