EasyManuals Logo

Tait T800 SL2 25W User Manual

Tait T800 SL2 25W
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
M8SL2-00-002-812 T855 General Information B1.9
© Copyright Tait Electronics Limited August 2004. All rights reserved.
1.2.4 Audio Section
1.2.4.1 General
Outputs Available line and monitor
Frequency Response flat or de-emphasised (750µs)
(link selectable)
Flat Response:
Bandwidth 67 to 3400Hz
Response within +1, –2dB of output level
at 1kHz
De-emphasised Response:
Bandwidth … 300 to 3400Hz
Response within +1, –3dB of a –6dB/octave
de-emphasis characteristic (ref. 1kHz)
Line Output:
Power … adjustable to >+10dBm
Load Impedance 600
Distortion (at –70dBm signal level):
De-emphasised Flat
Wide Bandwidth 2% 2%
Mid and Narrow Bandwidth 2% 4%
Monitor Output:
Power … 1W
Speaker Impedance 4
Distortion … 3%
(at –70dBm signal level, links set to de-emphasis)
1.2.4.2 CTCSS
Linkable High Pass Filter:
Bandwidth 350 to 3400Hz
Response within +1, –3dB of level at 1kHz
Hum And Noise 30dB min. at 250.3Hz
(1kHz at 60% system deviation 35dB typical (67 to 240Hz)
CTCSS at 10% system deviation)
Ton e Detect:
Tone Squelch Opening better than 6dB sinad
3dB sinad at 250.3Hz (typical)
4dB sinad at 100Hz (typical)
Tone Detect Bandwidth ±2.1Hz accept (typical)
±3.0Hz reject (typical)
Response Time 150ms open and close (typical)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tait T800 SL2 25W and is the answer not in the manual?

Tait T800 SL2 25W Specifications

General IconGeneral
BrandTait
ModelT800 SL2 25W
CategoryAccessories
LanguageEnglish

Related product manuals