130
TROUBLESHOOTING
If a Fuse Blows
If a light does not turn on or the electric
system does not operate, a fuse may be
blown. Inspect the fuses.
Inspecting and Replacing the
Fuse
WARNING
If the fuse blows as soon as it is replaced,
there is a problem with the electric
system. Continued use may lead to fire.
Consult a Takeuchi sales or service
outlet.
1. Turn the starter key to the OFF position to
stop the engine.
2. Open the fuse box (1) and inspect for any
blown fuses.
3. If a fuse is blown, replace it with a fuse of
the same capacity.
Inspecting the Fusible Link
If the electric power is not switched on after
turning the starter switch to the ON position,
the cartridge type fusible link (2) might be
blown open. Open the engine hood and
inspect. If the fusible link is blown, please
contact a Takeuchi sales or service.
Supplement: A fusible link is a large piece
of fuse wiring which is mounted in a circuit
which carries a large electrical current. Link
a regular fuse, the fusible link protects the
electrical parts and wiring from damage due
to abnormally large currents.
Fuse Layout and Circuits Protected
1
B5J004
E4J007
NormalBlown
B5J005
2
10A Horn
10A Water temperature gauge
10A Boom light
30A Stop solenoid
Capacity Protected circuit
To Next Page
Loading...
