Takeuchi TB108 User Manual

93
MAINTENANCE
Maintenance Chart
Maintenance Items See page
Walk-Around Inspection
Inspecting by opening the engine hood 95
Inspecting by walking around the machine 96
Inspecting while sitting in the operator’s seat 96
Daily Inspection (Every 10 Hours)
Inspecting and replenishing the coolant 97
Inspecting and replenishing the engine oil 98
Inspecting the water separator 99
Checking the fuel level 99
Inspecting the hydraulic oil level and replenishing 100
Lubricating the working equipment 101
After First 50 Hours (New Machines Only)
Replacing the hydraulic oil return filter 102
Replacing the engine oil and oil filter 103
Inspecting and adjusting the fan belt 104
Every 50 Hours
Inspecting and adjusting the crawler tension 105
Lubricating the slew bearing 106
Lubricating the slew motor pinion 107
Inspecting the battery fluid level and replenishing 107
Draining the fuel tank 108
Every 100 Hours
Cleaning the fuel filter 109
Cleaning the water separator 109
After First 250 Hours (New Machines Only)
Replacing the travel motor gear oil 110

Takeuchi TB108 Specifications

General

Max Reach	3, 480 mm
Width	980 mm
Max Reach at Ground Level	3, 480 mm
Transport Width	980 mm
Engine Power	8.1 kW (10.9 hp)
Engine Gross Power	8.1 kW (10.9 hp)