Takeuchi TB108 User Manual

95
MAINTENANCE
Perform the following inspections once every day before starting the engine the first time.
WARNING
¡¡
¡¡
¡ Before operating, perform the walk-around inspections and make repairs immediately
should any irregularities be found.
¡¡
¡¡
¡ Be sure to secure the engine hood when opening it. Do not open the engine hood
on slopes or in strong wind.
Before starting the engine, look around the machine and lower body, clean any combustible
materials off high temperature parts of the engine, and inspect for such irregularities as oil
leakage, water leakage and looseness of nuts and bolts.
Inspecting by Opening the
Engine Hood
1. Check for any twigs, leaves, oil or other
combustible materials around the engine
and battery.
2. Check for oil or engine coolant water
leakage around the engine.
3. Check for oil leakage from the hydraulic
tank, hydraulic devices, hoses and
connections.
Walk-Around Inspection
1
B5G003E
8
76
45
3
9
2
11
13
12
14
10

Takeuchi TB108 Specifications

General

Max Reach	3, 480 mm
Width	980 mm
Max Reach at Ground Level	3, 480 mm
Transport Width	980 mm
Engine Power	8.1 kW (10.9 hp)
Engine Gross Power	8.1 kW (10.9 hp)