153
OPTIONS
Hydraulic Breaker
For handling of the breaker, read the
hydraulic breaker’s manual, provided
separately.
WARNING
Do not use a breaker with the crawler
width narrowed!
¡¡
¡¡
¡ Always operate the machine with the
crawler width at the maximum to
increase machine stability. The smaller
the crawler width, the greater the
possibility the machine can tip over.
IMPORTANT: When mounting devices,
select devices suited for this machine.
For advice on selecting device, contact a
Takeuchi sales or service outlet.
Precautions on Operating
¡ Run the engine with 75% the maximum
speed.
¡ Pound with the chisel perpendicular to the
surface you are pounding.
¡ When pounding, press the chisel properly
against the object to be broken so as to
avoid pounding the air.
¡ Do not pry with the chisel, and do not pry
while pounding.
¡ Do not move the chisel while pounding.
¡ Do not pound continuously for over 30
seconds on the same surface.
Pressing force
B5L001
75%
To Next Page
Loading...
