Takeuchi TB108 User Manual

131
TROUBLESHOOTING
If a Warning Lamp is illuminated
If a warning lamp is illuminated during operation, park the machine in a safe place and perform
the procedures described below.
Warning lamp Lamp name Procedure
Battery charge
warning lamp
Engine oil
pressure
warning lamp
Inspect the engine oil level. If the lamp is illuminating
even though the level is normal or if it continues
illuminating after oil is added, consult a Takeuchi sales
or service outlet.
Refer to page 98 “Inspecting and Replenishing the
Engine Oil”.
OSOB080
OSOB070
There is a problem with the fan belt or alternator.
Inspect the fan belt for slack or breakage and adjust as
necessary. If the lamp continues illuminating after
maintenance, there is a problem with the alternator.
Consult a Takeuchi sales or service outlet.
Refer to page 104 “Inspecting and Adjusting the Fan
Belt”.

Takeuchi TB108 Specifications

General

Max Reach	3, 480 mm
Width	980 mm
Max Reach at Ground Level	3, 480 mm
Transport Width	980 mm
Engine Power	8.1 kW (10.9 hp)
Engine Gross Power	8.1 kW (10.9 hp)