53
OPERATION
Starting and Stopping the Engine
Before Starting the Engine
1. Adjust the seat for a comfortable operating
position.
2. Fasten your seatbelt.
3. Check that the safety lock lever is in the
locked position.
4. Check that all the levers and pedals are
in the neutral position.
5. Insert the key into the starter switch, turn
it to the ON position, then perform the
following inspection:
¡The battery charge warning lamp (1)
and engine oil pressure warning lamp
(2) light, and the meters also start
functioning.
If a lamp does not light, the bulb may be burnt
out or a wire may be damaged. Contact a
Takeuchi sales or service outlet for repairs.
HOURS
1/10
°C
1
2
B5D0032
B5B003
B5D002
PREHEAT
OFF
ON
START
E4D002
To Next Page
Loading...
Need help?
General
