Takeuchi TB108 User Manual

54
OPERATION
Starting and Stopping the Engine
Starting the Engine
WARNING
¡¡
¡¡
¡Clear the area of all persons.
¡¡
¡¡
¡Sound horn to alert everyone around
the machine.
IMPORTANT: Do not run the starter motor
for more than 15 consecutive seconds. If
the engine fails to start, wait for 30
seconds to protect the battery, and then
try again to start the engine.
Normal Starting
1. Pull the throttle lever to the middle position.
2. Turn the key to the START position and
start the engine.
3. Once the engine starts, release the key.
The key automatically returns to the ON
position.
4. Return the throttle lever.
5. Check that the warning lamps are off.
6. Warm up the engine.
Refer to page 55 “Warming Up the Engine”.
Starting in Cold Weather
1. Pull the throttle lever to the middle speed
position.
2. Turn the key to the PREHEAT position and
hold it there about 3 seconds.
3. Turn the key to the START position and
start the engine.
4. Once the engine starts, release the key.
The key automatically returns to the ON
position.
5. Return the throttle lever.
6. Check that the warning lamps are off.
7. Warm up the engine.
Refer to page 55 “Warming Up the
Engine”.
B5D004
PREHEAT
START
OFF
ON
E4D005
PREHEAT
OFF
ON
START
E4D060
B5D004

Takeuchi TB108 Specifications

General

Max Reach	3, 480 mm
Width	980 mm
Max Reach at Ground Level	3, 480 mm
Transport Width	980 mm
Engine Power	8.1 kW (10.9 hp)
Engine Gross Power	8.1 kW (10.9 hp)