46
CONTROLS
Levers and Pedals
Pedal Stopper
This is a device for fixing the auxiliary pedal
to the operating status so that when using
with a hand breaker, etc., connected to the
auxiliary ports, the hand breaker can be
turned on and off using it’s own switch.
1. Lift the pedal and press on the heel side
(A).
2. Put the bolt (1) through the hole in the
pedal to lock it.
Selector Lever
Use this lever when changing the crawler
width. This lever switches the operation of
the blade and span cylinder.
1. To change the crawler width, move this
lever to the right (S).
2. Move the blade lever and change the
crawler width.
B5B019
A
1
B
S
B5B0231
To Next Page
Loading...
