62
OPERATION
Machine Operation
3. Fold the hoe attachment and lower it to
30 to 40 cm(12 to 16 in.) above the ground.
4. Lift the dozer blade.
5. Operate the left and right travel levers as
described below.
When the dozer blade is in front of the
operator’s seat:
aTo move forward:
Tilt the levers forward.
eTo move backward:
Tilt the levers backward.
When the dozer blade is behind the
operator’s seat:
aTo move forward:
Tilt the levers backward.
eTo move backward:
Tilt the levers forward.
Traveling in 2nd (High) Speed
CAUTION
It is not possible to change directions
when traveling in 2nd (high) speed. To
change directions, first release the travel
speed lever to uncouple the travel levers.
1. Tilt the travel speed lever fully to the left
and grasp the right travel lever with the
same hand.
2. Tilt the levers forward or backward to travel
straight in 2nd speed.
3. Release the travel speed lever to return
to 1st (low) speed.
Pivot Turn
Turning to the left when stopped:
aTo turn forward to the left:
Tilt the right lever forward.
eTo turn backward to the left:
Tilt the right lever backward.
To turn to the right, operate the left lever in
the same way.
30~40cm
E4D014
E4D015
Neutral
Neutral
E4D016
Neutral
Neutral
1
2
B5D0241
E4D017
Neutral
To Next Page
Loading...
