Tally T2030 - Page 36

✔
*****
<ESC>[2w horizontal spacing 7.5 cpi
✔
*****
<ESC>[2y proportional mode ON
✔
*****
<ESC>[2z double height, super-/sub- and microscript OFF
✔
*****
<ESC>[21m double underline mode
✔
*****
<ESC>[21<n1>;<n2>{ bin 1 (front)
✔
*****
<ESC>[23m italic mode OFF
✔
*****
<ESC>[24m underline mode OFF
✔
*****
<ESC>[26m proportional mode ON
✔
*****
<ESC>[3g clear all horizontal tab stops
✔
*****
<ESC>[3m italic mode ON
✔
*****
<ESC>[3n device status report: “Some malfunction detected”
✔
*****
<ESC>[3<SP>K horizontal character spacing 6 cpi
✔
*****
<ESC>[3<SP>L vertical spacing 12 lpi
✔
*****
<ESC>[3w horizontal spacing 8.6
✔
*****
<ESC>[3z line density 6 lpi
✔
*****
<ESC>[4g clear all vertical tab stops
✔
*****
<ESC>[4m underline mode ON
✔
*****
<ESC>[4<SP>L vertical spacing 8 lpi
✔
*****
<ESC>[4w horizontal spacing 10 cpi
✔
*****
<ESC>[4y NLQ at 10 cpi
✔
*****
<ESC>[4z line density 8 lpi
✔
*****
<ESC>[5<n1>;<n2>{ fanfold paper tractor 1
✔
*****
<ESC>[6<n1>;<n2>{ fanfold paper tractor 2
✔
*****
<ESC>[5n request for device status report
✔
*****
<ESC>[5w horizontal spacing 12 cpi
✔
*****
<ESC>[5y NLQ at 12 cpi
✔
*****
<ESC>[5z graphics normal
✔
*****
<ESC>[50m proportional mode OFF
✔
*****
<ESC>[50<n1><n2>{ move paper to normal print position
✔
*****
<ESC>[51<n1><n2>{ move paper to tear-off position
✔
*****
<ESC>[52<n1><n2>{ move paper to view position
✔
*****
<ESC>[53m overline mode ON
✔
*****
<ESC>[55m overline mode OFF
✔
*****
<ESC>[6~ reset to initial state
✔
*****
<ESC>[6w horizontal spacing 15 cpi
✔
*****
<ESC>[6z graphics invers
✔
*****
<ESC>[7w horizontal spacing 17.1 cpi
✔
*****
<ESC>[7y proportional mode OFF
✔
*****
<ESC>[7z set bit 8 = unchanged
IBM IBM Epson Epson IBM-
MTPL Propr. Propr. FX850 LQ850+ AGM Code Function
X/XL X24/XL24 FX1050 LQ1050+
List of available control codes
2 - 7