Tally T2030 - Page 44

✔✔ <ESC>S1 subscript mode ON
✔✔ <ESC>t<n> select character set
<n> = 0 ➵ Epson Standard Character Set
1 ➵ Epson Graphics Character Set
2 ➵ User-defined characters
✔✔✔✔ <ESC>T super/subscript mode OFF
✔✔✔✔ <ESC>U<1> set unidirectional printing
✔✔✔✔ <ESC>U<0> reset unidirectional printing
✔✔ <ESC>U1 set unidirectional printing
✔✔ <ESC>U0 reset unidirectional printing
✔ <ESC>w<1> double height ON
✔ <ESC>w<0> double height OFF
✔✔✔✔ <ESC>W<1> set continuous enlarged print mode
✔✔✔✔ <ESC>W<0> reset continuous enlarged print mode
✔✔ <ESC>W1 set continuous enlarged print mode
✔✔ <ESC>W0 reset continuous enlarged print mode
✔✔ <ESC>x<1> set letter quality
✔✔ <ESC>x<0> set draft print quality
✔✔ <ESC>x1 set letter quality
✔✔ <ESC>x0 set draft print quality
✔✔ <ESC>X<n><m> setting of left and right margins
narrow printer wide printer
<n>, = 1 - 80 1 - 136 (10 cpi)
<m> 1 - 96 1 - 163 (12 cpi)
1 - 120 1 - 204 (15 cpi)
1 - 136 1 - 232 (17.1 cpi)
1 - 160 1 - 272 (20 cpi)
✔✔✔✔✔<ESC>Y<n1><n2> graphics 120 dpi
✔✔✔✔✔<ESC>Z<n1><n2> graphics 240 dpi
Formula: n = length of graphics data
<n2> = INT (n/256)
<n1> = n MOD 256
✔
*****
<ESC>| locking shift 4 (LS4)
✔
*****
<ESC>} locking shift 1 right (LS2R)
✔
*****
<ESC>~ locking shift 2 right (LS2R)
✔✔ ✔ ✔ ✔ <FF> form feed
✔✔ ✔ ✔ ✔ <HT> horizontal tab
✔ <HTS> control code HTS
✔ <IND> Vertical index
IBM IBM Epson Epson IBM-
MTPL Propr. Propr. FX850 LQ850+ AGM Code Function
X/XL X24/XL24 FX1050 LQ1050+
List of available control codes
2 - 15