Targa PNA-E3530 - Recharging from a Computer

Charging the Battery
16 English
Introduction
2.5.2 Recharging from a Computer
 Plug the Mini-USB connector of the USB cable [page 11, item 5] into
the receptacle [page 12, item 2] of your navigation device.
 Plug the USB connector of the cable into a USB port on your
computer. If your navigation device was in standby mode it will power
on automatically.
 The charging process starts automatically, and the charger indicator
[page 12, item 4] lights blue. At the same time, the computer will
establish a connection to the built-in memory of the device (see
page 96).