General Settings
86 English
Navigation
3.9.2 Regional settings
The Regional settings let you set the units of measure.
Tap on the display to open the GPS main menu.
Tap
Settings.
Tap the
button twice to show the third page of the Settings
menu.
Tap
Regional settings.
Select distance units
Choose between Kilometers and Miles by selecting the corresponding radio
button. Then tap on Next.
Time Zone
Choose the time zone where you will be using your navigation device. For an
easier assignment, major cities can be found behind the entries. If necessary
you can use the
and buttons to change the displayed page. Then tap on
Next.
Time display
Choose the time display format between three different options. Then tap on
Next.
The system will adjust daylight saving automatically.
To Next Page
Loading...