Taylor C606 - Parts Replacement Schedule

111
Model C606 Parts Replacement Schedule
Section 9 Parts Replacement Schedule
PART DESCRIPTION EVERY 3 MONTHS EVERY 6 MONTHS ANNUALLY
Scraper Blade-Shake X
Scraper Blade-Soft Serve X
Drive Shaft Seal X
Freezer Door O-Ring-Shake X
Freezer Door Gasket-Soft Serve X
Front Bearing X
Front Beater Shoes-Soft Serve X
Draw Valve O-Ring X
Spinner Shaft Seal-Shake X
Restrictor Cap-Shake X
Mix Feed Tube O-Ring X
Pump O-Ring X
Pump Valve Gasket X
Mix Feed Tube Check Ring X
Pump Drive Shaft O-Ring X
Syrup Valve-Duckbill X
Peristaltic Pump Tubes Inspect & Replace if Necessary
White Bristle Brush, 3” x 7” Inspect & Replace if Necessary Minimum
White Bristle Brush, 3” x 1/2” Inspect & Replace if Necessary Minimum
White Bristle Brush, 1-1/2” x 3” Inspect & Replace if Necessary Minimum
White Bristle Brush, 1” x 2” Inspect & Replace if Necessary Minimum
Black Bristle Brush, 1” x 2” Inspect & Replace if Necessary Minimum
Double-Ended Brush Inspect & Replace if Necessary Minimum
Yellow Bristle Brush Inspect & Replace if Necessary Minimum
Brush Set (3) Inspect & Replace if Necessary Minimum