Taylor C606 - X57029-XX Pump A. - MIX Simplified - Soft Serve

15
Model C606 Operator Parts Identification
140624
X57029-XX Pump A. - Mix Simplified - Soft Serve
Figure 6
ITEM DESCRIPTION PART NO.
1-7 PUMP A.-MIX SIMPLIFIED S.S. X57029-12
1 CYLINDER-PUMP HOPPER
SOFTSERVE
057943
2 PIN-RETAINING X55450
3 PISTON-PUMP-SIMPLIFIED 053526
4 O-RING-2-1/8 OD X .139W-#225 020051
5 CAP-VALVE BODY SS 056874-12
6 GASKET-SIMPLIFIED PUMP
VALVE
053527
7 ADAPTOR-MIX INLET-SS-RED 054825
8 O-RING-11/16ODX.103W-RED 016132
9 PIN-COTTER-HAIRPIN-1/8DIA 044731
10 SHAFT A.-DRIVE-MIX P UMP-
HOPPER
X41947
ITEM DESCRIPTION PART NO.
10a CRANK-DRIVE-HOPPER MIX
PUMP
039235
10b SHAFT-DRIVE-MIX PUMP-
HOPPER
041948
10c O-RING-1-3/4 OD X .139W 008904
10d O-RING 1/2 ID X .139W 048632
11 CLIP-RETAINER-MIX PUMP 044641
12 TUBE A.-FEED TUBE-SS X55974
13 RING-CHECK-FEED-TUBE 056524
14 SLEEVE A.-MIX PUMP *HT X44761
*NOTE: THE STANDARD PUMP IS X57029-12.
OVERRUN CAN BE CHANGED HIGHER OR LOWER
BY SUBSTITUTING THE VALVE BODY CAP. THE
HIGHER THE (-) THE HIGHER THE OVERRUN.