Taylor C606 - Page 88

82
Model C606Operating Procedures
Step 4
To remove the knob, compress the spring toward
the knob, using the washer. Compress it enough to
grab onto the plunger with your hand for support.
Begin removing the knob with your other hand.
Remove the knob o-ring. Remove the plunger nut
from the plunger tube. (See Figure 203.)
Figure 203
Step 5
Remove the plunger tube and the insert from the
plunger assembly. (See Figure 204.)
Figure 204
Step 6
Remove the spring and washer from the plunger
assembly. (See Figure 205.)
Figure 205
Step 7
Remove the seal assembly from the plunger
assembly. (See Figure 206.)
Figure 206
Step 8
Remove the seal o-ring from the seal. (See
Figure 207.)
Figure 207