12
Model R280
Automatic Load Size Reduction Feature
(For Dispensers with this feature.) When in the large load
size setting, if a basket has not been dispensed within
4 minutes the machine will automatically shift from the
large to the medium setting. The weight selection will
remain in the medium setting until the operator elects to
change it.
Adjustable Automatic Load Size Reduction
(Euro only)
(For Dispensers with this feature.) When operating the
Dispenser in the large or medium load size settings, the
Dispenser will automatically change the selected load
size to the next smaller size if a basket is not dispensed
within a preset time period, “1d” (default is 7 minutes). If
the Dispenser has changed from the large to the medium
load size, it will again change to the small load size if a
basket is not dispensed in a second preset time period,
“2d” (default is 3 minutes). Preset time periods “1d” and
“2d” are set using Manager Function F7 if present.
Daily Closing
Select Last Basket/Cancel Selections from the operator
panel to cancel all currently selected basket loads. Using
the operator panel, press the Up arrow
button until
“U” is displayed, then press the Enter button.
Both sides will stop automatically refilling the
accumulator housing. Dispense any fries present in the
accumulator housing into a basket. The Dispenser will
not refill the housing.
Empty the Dispenser. Dispose of any unused product or
place into an approved storage container. Place
container immediately into freezer to maintain frozen
product.
Take the removable components from the Dispenser to
the washing area. Wash them with a hot solution of
detergent and water. Rinse with clear water and sanitize
(HCS). Allow to air-dry. See
Disassembly, Defrost, and
Cleaning on page 8.
Defrost Cabinet Daily
Turn the power switch OFF, then open the cabinet door to
allow the Dispenser to defrost until free of frost.
CAUTION! Never use a sharp object to remove
frost buildup. Never drill or otherwise puncture cabinet
walls or top. Failure to follow this instruction may result in
damage to the Dispenser.
Once the cabinet is free of frost, wipe down the internal
and external cabinet with a hot solution of detergent and
water. Rinse with clear water and repeat wipe-down with
sanitizing solution (HCS) and allow to air-dry.
Reassemble the Dispenser. See Dispenser Assembly on
page 6. Move Dispenser back into place.
Last Basket/Cancel Selections
Before cleaning the Dispenser, or if it becomes
necessary to stop automatic dispensing, the operator is
able to cancel all selected basket loads. Both drums will
stop turning, and any currently selected basket load
lights will turn off for both sides of the Dispenser. Any
fries present in the accumulator housing will dispense
automatically if a basket is presented. The Dispenser will
not refill the housing.
To cancel currently selected basket loads using the
Operator Panel, press the Up arrow
button until
“U1” is displayed then press the Enter button. Both
sides will stop automatically refilling the accumulator
housing.
To return to normal operation for one or both sides, select
a Basket Size
button for the affected side(s).
To Next Page
Loading...
Need help?
General
