56
Model R280
Limited Warranty on Equipment
TAYLOR COMPANY LIMITED WARRANTY ON FREEZERS
Taylor Company is pleased to provide this limited warranty on new Taylor-branded freezer equipment available from
Taylor to the market generally (the “Product”) to the original purchaser only.
LIMITED WARRANTY
Taylor warrants the Product against failure due to defect in materials or workmanship under normal use and service as
follows. All warranty periods begin on the date of original Product installation. If a part fails due to defect during the
applicable warranty period, Taylor, through an authorized Taylor distributor or service agency, will provide a new or
remanufactured part, at Taylor’s option, to replace the failed defective part at no charge for the part. Except as
otherwise stated herein, these are Taylor’s exclusive obligations under this limited warranty for a Product failure. This
limited warranty is subject to all provisions, conditions, limitations, and exclusions listed below and on the reverse
(if any) of this document.
LIMITED WARRANTY CONDITIONS
1. If the date of original installation of the Product cannot be verified, then the limited warranty period begins thirty (30)
days from the date of Product Shipment (as indicated by the Product serial number). Proof of purchase may be
required at time of service.
2. This limited warranty is valid only if the Product is installed and all required service work on the Product is
performed by an authorized Taylor distributor or service agency, and only if genuine, new Taylor parts are used.
3. Installation, use, care, and maintenance must be normal and in accordance with all instructions contained in the
Equipment Manual.
4. Defective parts must be returned to the authorized Taylor distributor or service agency for credit.
5. The use of any refrigerant other than that specified on the Product’s data label will void this limited warranty.
LIMITED WARRANTY EXCEPTIONS
This limited warranty does not
cover:
1. Except as otherwise specifically set forth in this limited warranty, labor or other costs incurred for diagnosing,
repairing, removing, installing, shipping, servicing, or handling of defective parts, replacement parts, or new
Products.
2. Normal maintenance, cleaning, and lubrication as outlined in the Equipment Manual, including cleaning of
condensers.
3. Replacement of wear items designated as Class “000” parts in the Equipment Manual.
4. External hoses, electrical power supplies, and machine grounding.
5. Parts not supplied or designated by Taylor, or damages resulting from their use.
6. Return trips or waiting time required because a service technician is prevented from beginning warranty service
work promptly upon arrival.
7. Failure, damage, or repairs due to faulty installation, misapplication, abuse, no or improper servicing, unauthorized
alteration, or improper operation or use as indicated in the Equipment Manual, including but not limited to the failure
to use proper assembly and cleaning techniques, tools, or approved cleaning supplies.
Product Part Limited Warranty Period
R280 Refrigeration compressor (except service valve) Five (5) years
Parts not otherwise listed in this table or excluded below Two (2) years
To Next Page
Loading...
Need help?
General
