62
Model R280
Service Information
Warranty Service
Our Distributor will determine the cause of failure and provide appropriate resolution. Any required replacement parts
will be provided by us or by an authorized Service Support Center/Parts Distributor.
Our Distributor will make all reasonable efforts to perform such repairs during normal business hours, and will not be
responsible for any after-hours or holiday charges.
Non-Warranty Service
Service is normally conducted by customer appointed personnel, or by contracting a local service technician. The
service technician must be licensed in refrigeration to troubleshoot, open, or repair refrigeration and related systems.
Service fees are in accordance with industry standards.
Replacement parts are available through an authorized Taylor distributor or service agency.
Our authorized Taylor distributor or service agency is available for assistance providing product technical support, parts
and parts information, and service agent referral.
Record the following information for your records:
________________________________________
Date of Installation
________________________________________
Service Agency Telephone
________________________________________
Serial Number
When repairing this machine, use only replacement parts supplied by us or supplied by our factory-authorized parts
distributor. Use of replacement parts other than those supplied by us or by our factory-authorized parts distributor will
void the warranty.
All shipping charges are F.O.B. factory, and are subject to change without notice. Prices will be those in affect at the
time of shipment.
Taylor Company reserves the right to make suitable substitutions in materials, depending upon their availability.
CAUTION!
Only trained and/or qualified personnel should perform service on this equipment.
Only trained and/or qualified personnel, licensed in refrigeration, should perform service on the refrigeration systems of this
equipment.
Service functions described in this manual could cause irreversible damage to the equipment and/or injury to personnel if
performed improperly.
If the power cord is damaged, it must be replaced by the manufacturer, or its service agent, or a similarly qualified person to prevent
a hazard.
Use of non-OEM parts may create a hazard.
To Previous Page
Loading...
Need help?
General
